Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Shock Absorbers on a Chevrolet Beat

Model: Chevrolet Beat MK 1 - Years 2010-2021
Part: Shocks

To replace the shock absorbers on a Chevrolet Beat, lift the car with a jack or a lift so that the wheel corresponding to the shock absorber being replaced is not in contact with the ground. Next, loosen the bolts that secure the wheel to the hub so that it can be completely removed. After removing the wheel, loosen the bolts that secure the shock absorber at the top and bottom to replace it with a new one. After the replacement, reinstall the wheel.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Beat (2010-2021 / MK 1) In this video, you will learn how to change the tires on a Chevrolet Beat. First, while the wheel is still on the ground, loosen the bolts that hold …
Chevrolet Beat (2010-2021 / MK 1) This guide briefly explains how to remove and replace the front bumper of the Chevrolet Beat. First, open the hood of your car and start removing all…
Chevrolet Beat (2010-2021 / MK 1) As shown in this tutorial, replacing the cabin filter on a Chevrolet Beat is an extremely simple and quick task. Start by sitting in the passenger se…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos