Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Chevrolet Beat?

Model: Chevrolet Beat MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

Video tutorial

In this tutorial, you will see how to replace the cabin filter in the Chevrolet Beat, a very simple and quick operation. First, go to the passenger seat, as the filter is located behind the glove compartment, then open the drawer, pull it towards you, and unclip the two lower hinges from the dashboard.

Once this is done, open the long rectangular door by unlocking the corresponding clip and remove the old filter. Finally, insert the replacement, making sure to position it correctly and follow the reverse procedure to reassemble everything.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) As shown in this tutorial, replacing the cabin filter on a Chevrolet Beat is an extremely simple and quick task. Start by sitting in the passenger se…
How to Replace the Cabin Air Filter in a Chevrolet Beat?
How to Replace the Cabin Air Filter in a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) As you can see in this tutorial, replacing the cabin air filter in the Chevrolet Beat is a very simple and quick task. First, since it is located beh…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos