Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Knob on a Chevrolet Beat?

Model: Chevrolet Beat MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Shift knob

Video tutorial

To replace the shift knob on a Chevrolet Beat, disconnect the clips that secure the shift boot at the base of the center console so it can be lifted. Once the shift boot is lifted, rotate the shift knob counterclockwise to detach it from the top of the shift lever.

After removing the old knob, install the new one along with the corresponding boot that covers the lever. Properly fit it and secure the boot at the base.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Shift Knob on a Chevrolet Beat?
How to Replace the Shift Knob on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the shift knob on a Chevrolet Beat, use a tool to pry off the clips located at the base of the leather cover on the lever. Once these clip…
How to replace the cabin filter in the Chevrolet Beat?
How to replace the cabin filter in the Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) In this tutorial, you will see how to replace the cabin filter in the Chevrolet Beat, a very simple and quick operation. First, go to the passenger s…
How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos