Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Shift knob

Today, you will learn how to replace the gear knob and gaiter on the Chevrolet Spark. Replacing these parts is not too difficult; first, detach the gaiter cover using a flat-head screwdriver to lift the plastic base. Lift the gear gaiter and unclip the internal clip that secures the knob to the gear mechanism. Then pull firmly upwards to remove the knob and gaiter. After this operation, you can perform any necessary maintenance on the gearbox or replace the gaiter and knob. For Chevrolet models, you can use a compatible knob for the replacement.

Posted on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Chevrolet Spark
How to Replace the Gear Knob on a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Before you can start, sit in the driver's seat of your Chevrolet Spark and remove the gear lever gaiter. Begin by unscrewing the gear knob, using a m…
Removing Gear Knob and Gaiter on Chevrolet Spark
Removing Gear Knob and Gaiter on Chevrolet Spark
Chevrolet Spark (2009-2018 / ) In this video tutorial, you will learn how to remove the gaiter and gear knob from a Chevrolet Spark. First, get inside the vehicle: detach the gear …
Removing Gear Knob from Chevrolet Spark
Removing Gear Knob from Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Today, in this video tutorial, you will learn how to remove the gear knob from a Chevrolet Spark. First, get inside the car and detach the gear gaite…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos