Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Knob on a Chevrolet Beat?

Model: Chevrolet Beat MK 1 - Years 2010-2021
Part: Shift knob

To replace the shift knob on a Chevrolet Beat, use a tool to pry off the clips located at the base of the leather cover on the lever. Once these clips are removed, you can lift the cover and detach it from the shift knob. At this point, the knob can be removed by pushing it upward and disengaging it from the lever. Now, you can install the new knob onto the lever after covering it with the leather boot, which should also be properly secured.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Chevrolet Beat?
How to Replace the Cabin Air Filter in a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) As you can see in this tutorial, replacing the cabin air filter in the Chevrolet Beat is a very simple and quick task. First, since it is located beh…
How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…
How to Replace the Shift Knob on a Chevrolet Beat?
How to Replace the Shift Knob on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the shift knob on a Chevrolet Beat, disconnect the clips that secure the shift boot at the base of the center console so it can be lifted.…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos