Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replace the Clutch on the Chevrolet Spark (2014)

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Clutch

This guide provides the main instructions needed to remove and replace the clutch on the 2014 Chevrolet Spark, as well as the Matiz. First, open the engine bonnet and remove the battery by disconnecting the terminals; then lift the vehicle and disconnect the arm from the joint by unscrewing the drive shaft bolts and detaching it, as shown in the video. Next, drain the transmission oil and unscrew all the fastening screws of the gearbox and those connecting to the engine mount. Then remove and replace the clutch.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gearbox and Clutch from the Chevrolet Spark
How to Remove the Gearbox and Clutch from the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In this brief guide, you will find the main instructions for removing the gearbox and clutch from the Chevrolet Spark. First, open the bonnet and beg…
How to replace the clutch cable of the Chevrolet Spark
How to replace the clutch cable of the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In this video, we can see how to change the clutch cable of the Chevrolet Spark: this cable connects the clutch lever, operated by the driver's foot,…
Replacing the Clutch Cable on the Chevrolet Spark
Replacing the Clutch Cable on the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Follow the steps below to remove and replace the clutch cable on the Chevrolet Spark. First, open the bonnet of the vehicle and begin by removing the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos