Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Spark - Handle

Handle Chevrolet Spark (2009-2016 / m 300, mk 1)

Chevrolet Spark (2009-2016 / M300, MK 1)
How to disassemble the external handle of the rear door of the Chevrolet Spark
The following steps will allow us to disassemble and replace the external handle of the rear door of the Chevrolet Spark. First, we open the rear door of the …Read all…
Posted on 2 August 2025 by ScegliAuto
Chevrolet Spark (2009-2016 / M300, MK 1)
How to replace the external handle of the Chevrolet Spark
The steps to replace the external handle of the Chevrolet Spark or Matiz are as follows: The first step is to detach the door panel, to do this we need to …Read all…
Posted on 19 May 2024 by ScegliAuto
Speaker (1) Antenna (1) Car stereo (3) Battery (2) Ignition coil (1) Spark plugs (6) Key (4) Timing belt (2) Dashboard (1) Bearing (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (2) Fuel filter (3) Oil filter (1) Clutch (4) Window switch (1) Accessory kit (1) Light bulb (2) Headlight bulb (7) Tail light bulb (1) Interior dome light bulb (1) Handle (2) Engine oil (1) Door trim panel (5) Windshield (1) Brake pads (1) Shift knob (8) Fuel pump (3) Radiator (1) Fuse box (22) Side mirror (3) Warning light – error code (4) (4) Tire pressure warning light (1) Service warning light (13) EGR valve (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos