Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs of the Chevrolet Spark

Model: Chevrolet Spark - Years 2009-2018
Part: Spark plugs

Release and lift the bonnet. The first step is to disconnect the battery plugs to protect all electronic components. Now, remove the bolts securing the cover to the engine, disconnecting the hose on the side as well. Disconnect the connectors on top of the coils and then remove the coils by pulling them straight up after removing the bolts that hold them in place. Now, using a socket wrench, unscrew the spark plugs from the bottom of the newly freed hole, taking care not to let too much dirt enter this cylinder.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
How do you replace the spark plugs on a Chevrolet Spark?
How do you replace the spark plugs on a Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) Replacing the spark plugs on your Chevrolet Spark is a simple job that you can do in a few steps. First of all, turn off the engine and let it cool d…
How to Replace the Spark Plugs on the Chevrolet Spark
How to Replace the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Today's guide will show you the steps to remove and replace the engine spark plugs on the Chevrolet Spark. First, open the bonnet and disconnect the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos