Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Ignition coil

In this tutorial, you will see the steps to remove and replace the ignition coil connected to the spark plugs, which allows the current to pass for the spark, on the Chevrolet Spark, as well as the Matiz and Aveo. First, open the bonnet and unscrew the three fixing screws of the coil located on the top; then disconnect the main electrical connector and the spark plug wires, as shown in the video. At this point, you can remove and replace the coil, applying the reverse procedure for reassembly!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the spark plugs of the Chevrolet Spark 1.2 16V.
Chevrolet Spark (2009-2016 / M300, MK 1) This short guide will illustrate the main instructions useful for disassembling and replacing the spark plugs of the Chevrolet Spark 1.2 16V engine. …
How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
How do you replace the spark plugs on a Chevrolet Spark?
How do you replace the spark plugs on a Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) Replacing the spark plugs on your Chevrolet Spark is a simple job that you can do in a few steps. First of all, turn off the engine and let it cool d…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos