Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Coil Pack on a Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Ignition coil

See other generations:
Video tutorial

Want to remove the coil pack from your Chevrolet Aveo yourself? Let's see how to do it in this video. Pull the engine bay release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. The coils are found under the engine soundproofing panel (remove it). Unscrew the bolts with the appropriate screwdriver, then move the coil pack left and right until it comes out of the cylinder head.

Take the new coil pack and insert it into the cylinder head, connect the power connector and lower the plastic clip.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a 2010 Aveo Dashboard
How to Remove the Radio from a 2010 Aveo Dashboard
Chevrolet Aveo (2002-2011 / MK 1, T200) Want to remove the radio from a Chevrolet Aveo for repairs? Let's take a look at removing the radio from the Aveo. Remove the trim around the radio u…
How to Remove the Rear Bumper of the Chevrolet Aveo?
How to Remove the Rear Bumper of the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) To remove the rear bumper of the Chevrolet Aveo, open the boot and loosen the screws located just below the seal and next to the rear lights. Next, l…
How to Remove the Radio from a Chevrolet Aveo
How to Remove the Radio from a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) How do you remove the original radio from a Chevrolet Aveo? Follow this guide to proceed with the disassembly. To begin: using a plastic or metal spa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos