Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : How to disassemble the car stereo on a Chevrolet Aveo

Chevrolet Aveo - Video tutorial

Model: Chevrolet Aveo T200, MK 1 - Years 2002-2011
Part: Car stereo
Operation: How to disassemble the car stereo on a Chevrolet Aveo

How do we disassemble the original car stereo on a Chevrolet Aveo? Let's see carefully in this video how to proceed with the disassembly of the piece. To begin: with a plastic or metal spatula, we remove by leveraging the plastic trim molding placed on the side of the stereo. With a screwdriver unscrew the fastening screws of the car radio, also in the lower part of the glove compartment, remove the car radio, being careful not to damage the wiring of the same (disconnect the power supply terminals and the antenna cable). Finally we reassemble the new stereo.


Posted on 4 October 2023 by ScegliAuto



Remove the car stereo from your Chevrolet Aveo
Chevrolet Aveo (2002-2011 / T200, MK 1) Do you want to remove the car radio of your Chevrolet Aveo and don't know how to do it? Let's see in this video how to disassemble the original stere
How to remove the car stereo in a Chevrolet Aveo?
Chevrolet Aveo (2012-2020 / MK 2, T300) In this tutorial we can see how to disassemble the car radio in the Chevrolet Aveo, an extremely simple and quick operation. First of all, make sure
To disassemble and replace the car radio of the Chevrolet Aveo.
Chevrolet Aveo (2002-2011 / T200, MK 1) Briefly, we will see the instructions that will allow us to disassemble and replace the original radio of the Chevrolet Aveo, following these simple

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos