Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna Base on a Chevrolet Silverado

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Antenna

See other generations:
Video tutorial

Let's see how to replace the antenna base on a Chevy Silverado using a replacement part from a junkyard. Of course, the process is much simpler if you buy a new one (you can find one in various colors on joom.com for $17.00). Remove the base from the roof of the vehicle using a putty knife.

There are no screws; it is just glued on. In the case of the YouTuber, he needs to reconnect all the wires since it is a used part. Clearly, with a new part, you just need to plug in the connectors.

Now clean the surface where you will glue the new part, and the operation is complete.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Replace the Seat Adjustment Knob on a Chevrolet Silverado?
How to Replace the Seat Adjustment Knob on a Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To replace the seat adjustment knob on a Chevrolet Silverado, use a tool like a screwdriver to pry off the cover that wraps around the base of the se…
How to Replace the Headlight Bulb in a Chevrolet Silverado?
How to Replace the Headlight Bulb in a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) In this video, you can see how to replace the headlight bulb in a Chevrolet Silverado. For the passenger side, first remove the air filter box by uns…
How to Replace the Antenna on a Chevrolet Silverado?
How to Replace the Antenna on a Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To replace the antenna on a Chevrolet Silverado, remove it from its housing located at the base of the windshield on the passenger side: by turning t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos