Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Chevrolet Silverado

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Antenna

See other generations:
Video tutorial

Discover in this brief and simple guide how to remove and replace the radio antenna on a Chevrolet Silverado by following the instructions below. First, obtain the new antenna that is the correct type for your vehicle; then, unscrew it counterclockwise to remove it from its base, as shown in the video.

At this point, screw in the new antenna of the correct type, using a socket wrench to tighten it gently; then check the operation of the various radio stations by getting inside the vehicle!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Antenna on a Chevrolet Silverado?
How to Replace the Antenna on a Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To replace the antenna on a Chevrolet Silverado, remove it from its housing located at the base of the windshield on the passenger side: by turning t…
How to Replace the Antenna Base on a Chevrolet Silverado
How to Replace the Antenna Base on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) Let's see how to replace the antenna base on a Chevy Silverado using a replacement part from a junkyard. Of course, the process is much simpler if yo…
Where to Find the Fuse Box of the 2006 Chevrolet Silverado
Where to Find the Fuse Box of the 2006 Chevrolet Silverado
Chevrolet Silverado (1998-2007 / MK 1) Finding the fuses in your first-generation Chevrolet Silverado (2006) is very simple. Just follow the steps in this guide to complete the task in sec…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos