Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Chevrolet Silverado?

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Antenna

See other generations:
Video tutorial

To replace the antenna on a Chevrolet Silverado, remove it from its housing located at the base of the windshield on the passenger side: by turning the antenna with an appropriate wrench, you can completely pull it out so you can insert the new one. Position the new antenna in its housing, then rotate it clockwise to secure it; once the new antenna is installed, check that the radio functions correctly after installation.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Replace the Antenna on a Chevrolet Silverado
How to Replace the Antenna on a Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Discover in this brief and simple guide how to remove and replace the radio antenna on a Chevrolet Silverado by following the instructions below. Fir…
How to Replace the Antenna Base on a Chevrolet Silverado
How to Replace the Antenna Base on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) Let's see how to replace the antenna base on a Chevy Silverado using a replacement part from a junkyard. Of course, the process is much simpler if yo…
How to Replace the Battery on the Chevrolet Silverado
How to Replace the Battery on the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Let's look at this guide for the instructions to remove and replace the battery on the Chevrolet Silverado in simple and quick steps. First, open the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos