Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the sun visor in the Chevrolet Spark?

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Windshield

See other generations:
Video tutorial

In this tutorial, we can see how to replace the sun visor in the Chevrolet Spark, an extremely simple and quick operation. First of all, let's go inside the car, then open the visor in question and detach the pin from the internal support.

Unscrew using a Torx T15 key the fixing screws of both supports, two per base, lever with a screwdriver with a flat tip and separate the bases from the roof. At this point, all that remains is to position the replacements, reassemble everything following the reverse procedure, and, if necessary, repeat the operation on the opposite side.


Posted on 5 March 2025 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) In this tutorial, you will see the steps to remove and replace the ignition coil connected to the spark plugs, which allows the current to pass for t…
How do you replace the spark plugs on a Chevrolet Spark?
How do you replace the spark plugs on a Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) Replacing the spark plugs on your Chevrolet Spark is a simple job that you can do in a few steps. First of all, turn off the engine and let it cool d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos