Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Key in a Chevrolet Spark?

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Key

In this tutorial, see how to program a new key in a Chevrolet Spark, a very simple and quick operation. To do this, you will obviously need a working key; otherwise, you will need to visit an official Chevrolet workshop. First, enter the cabin, then insert the working key, turn on the instrument panel, and turn it off. Next, insert the new key and turn the ignition on and off again. If the procedure is successful, the key will now be correctly programmed, and you will be able to start the engine.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2021 Chevrolet Spark
How to reset the oil light on the 2021 Chevrolet Spark
Chevrolet Spark (2016-2022 / M400) To reset the oil engine light on the 2021 Chevrolet Spark, we need to: - turn on the car's dashboard; - press the SET button, located at the top of t…
How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
How to reset the service on the Chevrolet Spark?
How to reset the service on the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) In this tutorial we can see how to reset the service in the Chevrolet Spark, a very simple and quick operation, to be carried out only once all sched…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos