Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard Disassembly: Instrument Cluster

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Dashboard

First, detach the trim surrounding the instrument cluster by pulling it forward. Then, unscrew the two screws located at the top of the instrument cluster and subsequently detach the upper cover. At this point, unscrew the 4 fastening screws of the instrument cluster (two at the bottom and two at the back) and pull it forward to extract it from its housing; then disconnect the connectors attached to it and place it on the workbench. To carry out repairs on the instrument cluster, disassemble it by detaching the front glass and the rear plastic cover (be careful not to damage the plastic fastening tabs).
Once the repair is complete, reassemble everything and proceed in reverse for reinstallation.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster on the 2004 Chevrolet Aveo?
How to Remove the Instrument Cluster on the 2004 Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) To remove the instrument cluster, first, free it from the plastic trim surrounding it, which is only clipped in place. Pull it away to expose the scr…
How to replace the radio of the Chevrolet Aveo
How to replace the radio of the Chevrolet Aveo
Chevrolet Aveo (2012-2020 / T300, MK 2) Today we will explain how to replace the radio of the Chevrolet Aveo. We start by removing the previous radio for which you will need to use a plasti…
How to Remove the Dashboard and Radio in a Chevrolet Aveo
How to Remove the Dashboard and Radio in a Chevrolet Aveo
Chevrolet Aveo (2012-2020 / T300, MK 2) To remove the central dashboard and radio in a Chevrolet Aveo, first remember to disconnect the negative terminal of the battery. Next, get inside th…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos