Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan of the Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Blower motor

The process of removing the cabin fan of the air conditioning is very simple; here’s how to carry out the operation on the Chevrolet Aveo. First, get inside the cabin and locate the cabin fan, situated under the glove compartment; then disconnect its electrical connector and unscrew the fixing screws found on the sides, as shown in the video. At this point, remove and replace the cabin fan with the new one of the correct type; once secured, check its operation!

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan from Chevrolet Aveo
Removing the Cabin Fan from Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Today, see how to remove the cabin fan from a Chevrolet Aveo in simple steps. First, get inside the car and open the glove compartment: then use a sc…
How to Replace the Cabin Filter on a 2008 Chevrolet Aveo
How to Replace the Cabin Filter on a 2008 Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) The cabin air filter on your 2008 Chevrolet Aveo is located just behind the glove compartment. In this mini guide, you will learn how to replace it i…
Where is the fuse box located in the Chevrolet Aveo?
Where is the fuse box located in the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) The Chevrolet Aveo model 1 has two fuse boxes inside. The first fuse box is located inside the vehicle, specifically behind the driver's side glove c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos