Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan from Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Blower motor

See other generations:
Video tutorial

Today, see how to remove the cabin fan from a Chevrolet Aveo in simple steps. First, get inside the car and open the glove compartment: then use a screwdriver to remove the screws from the glove compartment and access the internal part where the motor and fan are located.

At this point, disconnect its electrical connector by pressing on the tab, and using a Torx screwdriver of 8 mm, remove the screws of the fan, as shown in the video. Finally, extract the fan and replace it with a new one: follow the video to the end!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan of the Chevrolet Aveo
How to Replace the Cabin Fan of the Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) The process of removing the cabin fan of the air conditioning is very simple; here’s how to carry out the operation on the Chevrolet Aveo. First, get…
Where is the fuse box located in the Chevrolet Aveo?
Where is the fuse box located in the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) The Chevrolet Aveo model 1 has two fuse boxes inside. The first fuse box is located inside the vehicle, specifically behind the driver's side glove c…
Where to Find the Fuses in the Chevrolet Aveo
Where to Find the Fuses in the Chevrolet Aveo
Chevrolet Aveo (2012-2020 / MK 2, T300) Follow this procedure to locate the fuse box in your Chevrolet Aveo. First, get into the car and take your seat in the driver's position. Next, focus…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos