Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Chevrolet Aveo?

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper of the Chevrolet Aveo, open the boot and loosen the screws located just below the seal and next to the rear lights. Next, loosen the screws found at the bottom of the bumper and inside the wheel arch covers.

Once all these screws are removed, you can detach the bumper from the rest of the bodywork and completely remove it after disconnecting the relevant connectors. After removal, you can replace it with a new spare part.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Remove the Fog Light and Bulb on a Chevrolet Aveo
How to Remove the Fog Light and Bulb on a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) In this short and simple guide, you will see the steps to remove and replace the fog light and its bulb on a Chevrolet Aveo. First, move to the front…
Where to Find the Fuses in the Chevrolet Aveo
Where to Find the Fuses in the Chevrolet Aveo
Chevrolet Aveo (2012-2020 / MK 2, T300) Follow this procedure to locate the fuse box in your Chevrolet Aveo. First, get into the car and take your seat in the driver's position. Next, focus…
Remove Rear Light on Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Replacing the damaged rear light on a Chevrolet Aveo? Remove the broken light and fit a new one. Lift the boot lid, unscrew the securing screws on th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos