Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Rear Light on Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light

See other generations:
This video is currently unavailable

Replacing the damaged rear light on a Chevrolet Aveo? Remove the broken light and fit a new one. Lift the boot lid, unscrew the securing screws on the side of the right or left light using a screwdriver. Detach the rear light from its housing once all screws are removed and disconnect the power connectors.

Replace the damaged bulbs with new ones (same size and voltage). Refit the light with the associated screws and reconnect the power connectors.

Press and screw in the rear light. Test the correct operation of the bulbs.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Chevrolet Aveo?
How to Remove the Rear Bumper of the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) To remove the rear bumper of the Chevrolet Aveo, open the boot and loosen the screws located just below the seal and next to the rear lights. Next, l…
How to Remove the Fog Light and Bulb on a Chevrolet Aveo
How to Remove the Fog Light and Bulb on a Chevrolet Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) In this short and simple guide, you will see the steps to remove and replace the fog light and its bulb on a Chevrolet Aveo. First, move to the front…
How do you remove the headlight of the 2020 Chevrolet Aveo?
How do you remove the headlight of the 2020 Chevrolet Aveo?
Chevrolet Aveo (2012-2020 / MK 2, T300) It is not necessary to disassemble the headlight of a vehicle because it is broken, for example following an accident, you could also decide to repla…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos