Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Aveo
  6. : How to disassemble the fog light and bulb of the Chevrolet Aveo.

Chevrolet Aveo - Video tutorial

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Fog lights
Operation: How to disassemble the fog light and bulb of the Chevrolet Aveo.

In this short and simple guide, we will see the steps that will allow us to dismantle and replace the fog light and its bulb of the Chevrolet Aveo. First of all, let's move to the front and start by dismantling the lower part of the bumper, removing the plastic cover; to do this, unscrew the two fixing screws with a 7mm wrench, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it from the light fixture, also removing the bulb holder; then replace the fog light bulb, finally reassembling the plastic cover under the bumper!


Posted on 26 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos