Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper on the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial, you can see how to remove the rear bumper on the Chevrolet Cruze, an extremely simple and quick operation. First, open the boot lid, then remove the indicated plastic caps, unscrew the released screws, and remove both lights.

Continue by unscrewing the screws located inside the wheel arches, move underneath the vehicle, and unscrew the final fixing bolts. At this point, grasp the bumper at one of the ends, pull it outwards, and separate it from the chassis.

To fit the replacement, simply follow the reverse procedure.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Chevrolet Cruze
How to Remove the Rear Bumper of the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) The main steps today will show you how to remove and replace the rear bumper of the Chevrolet Cruze. First, open the boot and start unscrewing all th…
How to Remove the Front Headlamp of the Chevrolet Cruze?
How to Remove the Front Headlamp of the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) To remove the front headlamp of the Chevrolet Cruze, you need to loosen all the fixing screws that secure the bumper: open the bonnet and unscrew the…
How to Remove the Front Headlight on a Chevrolet Cruze
How to Remove the Front Headlight on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before you start, open the bonnet of your Chevrolet Cruze. Begin by removing the front bumper by unscrewing the fixing screws and clips located aroun…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos