Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper of the Chevrolet Cruze

Model: Chevrolet Cruze D2lc-K, D2lc - Years 2016-2023
Part: Rear bumper

The main steps today will show you how to remove and replace the rear bumper of the Chevrolet Cruze. First, open the boot and start unscrewing all the fixing screws found on both sides of the rear wheel arches; gently detach the bumper and unscrew any additional screws located above the bumper, as shown in the video. At this point, remove and replace the bumper with the new one if necessary, using the original bolts to refit it to the bodywork, applying the reverse procedure!

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) Below we will see the main steps that will allow us to disassemble and replace the fuel pump of the Chevrolet Cruze. First, we open the rear doors of…
Chevrolet Cruze (2000-2010 / ) How do you remove the fog light from the Chevrolet Cruze? Follow these steps to remove the fog light and install it back into the front bumper plasti…
Chevrolet Cruze (2009-2015 / MK 1, J300) This tutorial shows how to replace the emblem on the Chevrolet Cruze, a very simple and quick operation. First, open the bonnet, then unclip all the …

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos