Do it yourself
| ||||
|
Chevrolet Cruze - Video tutorial
Model: Chevrolet Cruze
J300, MK 1
- Years 2009-2015 The following guide shows how to remove the rear bumper. Disassembling it must first check that there are no internal damage. To be able to act it will be enough to perform some simple steps that will allow you to change the bumper of your car in an easy way. As needed, you must have at hand: keys, gloves and jack. The jack is used to lift the car and remove the tires properly. Disassembly can begin by removing the two rear wheels first. Then it will be necessary, slowly, to remove the bolts of the bumper and then leave the side of the bumper that has already been removed on the ground and thus go to the opposite side.
Posted on 31 July 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.043
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |