Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Cruze
  6. : Rear bumper

Chevrolet Cruze - Rear bumper

Chevrolet Cruze (2009-2015 / J300, MK 1)
How to remove the rear bumper on the Chevrolet Cruze?

In this tutorial, we can see how to remove the rear bumper on the Chevrolet Cruze, a very simple and quick operation. First, we open the trunk door, then we …read all…
Posted on 25 December 2023 by ScegliAuto
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc)
How to remove the rear bumper of the Chevrolet Cruze.

The main steps today will show us how to disassemble and replace the rear bumper of the Chevrolet Cruze. First, we open the rear trunk door and start …read all…
Posted on 5 November 2023 by ScegliAuto
Chevrolet Cruze (2009-2015 / J300, MK 1)
Guide to removing the rear bumper

The following guide shows how to remove the rear bumper. Disassembling it must first check that there are no internal damage. To be able to act it will be …read all…
Posted on 31 July 2023 by ScegliAuto

Airbags (1) Alternator (2) Air conditioning (1) Car stereo (3) Battery (4) Air Vents (1) Gearbox (1) Glove box (1) Control unit (1) Key (8) Timing belt (2) -board computer (3) Checks and maintenance (26) Dashboard (1) Headlight (2) Tail light (2) Fog lights (2) Particulate filter (1) Air filter (1) Cabin air filter (4) Oil filter (1) Hand brake (2) Injectors (1) Side turn signal light bulb (1) Headlight bulb (8) Rear light bulb (3) Interior lights ceiling light bulb (2) Antifreeze liquid (1) License plate light (1) Third brake light (1) Handle (1) Engine (1) Starter motor (2) Engine oil (3) Door panel (5) Front bumper (2) Rear bumper (3) Brake pads (2) Tires (4) Gear Shift Knob (5) Pump (1) Fuel pump (3) Door (3) Push button (1) Instrument cluster (8) Radiator (4) Passenger compartment heating radiator (1) Fuse box (10) Seat (5) Coolant temperature sensor (1) Lock (2) Outside rearview mirror (5) Manufacturer's coat of arms (1) Windscreen wipers (3) EGR valve (2) Interior blower (1) Side window (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos