Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Cruze
    4. : -board computer

Chevrolet Cruze - -board computer

Chevrolet Cruze (2009-2015 / J300, MK 1)
How to perform a service reset on a Hyundai Santa Cruz.
In this video tutorial, we can see how to perform a service reset on a Hyundai Santa Cruz by following a few simple steps that will allow you to manage your …read all…
Posted on 12 September 2023 by ScegliAuto
Chevrolet Cruze (2009-2015 / J300, MK 1)
How to reset service on Chevrolet Cruze?
In order to reset the oil change signal on the vehicle, it is necessary to follow the instructions below: sit in the driver's seat and turn on the ignition, on …read all…
Posted on 29 November 2022 by ScegliAuto
Chevrolet Cruze (2009-2015 / J300, MK 1)
Disassembly of the navigator and climate control area on Chevrolet Cruze
Today we will show you a simple and affordable maintenance. Remove the air vents located on the side of the on-board computer, and joined by the lower plastic. …read all…
Posted on 1 January 2024 by ScegliAuto
Airbags (1) Alternator (2) Air conditioning (1) Car stereo (3) Battery (4) Air Vents (1) Gearbox (1) Glove box (1) Control unit (1) Key (8) Timing belt (2) -board computer (3) Checks and maintenance (26) Dashboard (1) Headlight (2) Tail light (2) Fog lights (2) Particulate filter (1) Air filter (1) Cabin air filter (4) Oil filter (1) Hand brake (2) Injectors (1) Side turn signal light bulb (1) Headlight bulb (8) Rear light bulb (3) Interior lights ceiling light bulb (2) Antifreeze liquid (1) License plate light (1) Third brake light (1) Handle (1) Engine (1) Starter motor (2) Engine oil (3) Door panel (5) Front bumper (2) Rear bumper (3) Brake pads (2) Tires (4) Gear Shift Knob (5) Pump (1) Fuel pump (3) Door (3) Push button (1) Instrument cluster (8) Radiator (4) Passenger compartment heating radiator (1) Fuse box (10) Seat (5) Coolant temperature sensor (1) Lock (2) Outside rearview mirror (5) Manufacturer's coat of arms (1) Windscreen wipers (3) EGR valve (2) Interior blower (1) Side window (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos