Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Sat Nav and Climate Control Area on Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Onboard computer

See other generations:
Video tutorial

Today, you will perform a simple maintenance task that is accessible to everyone. Remove the air vents located to the side of the dashboard, which are connected by the lower plastic.

To do this, use a plastic wedge to lever in the gaps. Similarly, remove the underlying plastics related to the climate control commands.

Now, unscrew the screws that secure the sat nav controls at the corners and the screws that secure the climate control plastic. Disconnect all the various connectors.

Also, remove the monitor by unscrewing the two screws that secure it from underneath and disconnecting its connector.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Original Stereo from a Chevrolet Cruze
How to Remove the Original Stereo from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) How do you remove the stereo from a Chevrolet Cruze to install a sat-nav? Follow this guide carefully. Using a plastic or metal trim tool, lever off …
How to replace the battery of the Chevrolet Cruze remote control?
How to replace the battery of the Chevrolet Cruze remote control?
Chevrolet Cruze (2009-2015 / J300, MK 1) Replacing the remote control battery of the Chevrolet Cruze, as we can see in this tutorial, is an extremely simple and quick operation. To do this, …
How to replace the battery of the Chevrolet Cruze remote control?
How to replace the battery of the Chevrolet Cruze remote control?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial we can see how to replace the battery of the Chevrolet Cruze remote control, an extremely simple and quick operation. To do this, we…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos