Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard Panel of a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Dashboard

See other generations:
Video tutorial

How do you remove the dashboard panel with all its components from a Chevrolet Cruze? Follow this guide to proceed with the disassembly. Using a plastic or metal spatula, pry off the plastic trim around the gear knob.

Unscrew the securing bolts of the glove compartment using a socket wrench, then the bolts of the air conditioning control panel (detach the control panel). Unscrew the bolts securing the radio to the dashboard, and finally remove the radio, being careful not to damage the wiring (disconnect the power terminals and the antenna cable).

Finally, reassemble everything in reverse order. -Socket wrench with sockets -Screwdriver with bits -Plastic spatula.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Chevrolet Cruze
How to Remove the Radio from a Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) If the factory radio in your Chevrolet Cruze is faulty and you want to replace it with a new one, read this guide and follow the steps to easily remo…
How to Reset the Service Light on a Chevrolet Cruze?
How to Reset the Service Light on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) To reset the Service light on the dashboard of the Chevrolet Cruze, insert the ignition key into the ignition barrel and turn it to switch on the das…
How to Remove the Glove Compartment of a Chevrolet Cruze
How to Remove the Glove Compartment of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) This video shows how to remove the glove compartment in the cabin of a Chevrolet Cruze. Open the glove compartment and detach the end stop brackets, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos