Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver side air vent on the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Air vents

Do you want to replace the air vent on the Chevrolet Cruze? Remove the vent from inside the dashboard, here's how. Pry at the top and bottom with the levers (as shown in the video): insert the lever into the chrome frame. Disconnect the air vent and extract it from the centre console. Once you have pulled the vent outwards, remove the piece. Install the new air vent inside the dashboard: push the vent until it is fully locked in place. After installing the new piece, check its operation.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…
How to Replace the Front Bulb on a Chevrolet Cruze
How to Replace the Front Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Before you start, open the bonnet of your Chevrolet Cruze. This will give you access to the rear side of the blown bulb. Begin by rotating the bulb c…
How to Remove the Front Headlight on a Chevrolet Cruze
How to Remove the Front Headlight on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Before you start, open the bonnet of your Chevrolet Cruze. Begin by removing the front bumper by unscrewing the fixing screws and clips located aroun…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos