Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Stereo from a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

See other generations:
Video tutorial

How do you remove the stereo from a Chevrolet Cruze to install a sat-nav? Follow this guide carefully. Using a plastic or metal trim tool, lever off the plastic trim around the gear knob.

Unscrew the securing screws of the trim around the air vents (pull it away). Use a screwdriver to unscrew the screws securing the display and the air conditioning control panel.

Unscrew the pins that secure the stereo to the dashboard, then carefully pull out the stereo, taking care not to damage the wiring (disconnect the power connectors and the antenna cable). Finally, refit the sat-nav by reversing the steps.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Chevrolet Cruze
Removing the Radio from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Removing the car radio from a Chevrolet Cruze with associated parts. Remove the covering plastics to access the car radio. Take off the entire centra…
How to Remove the Rear Bumper of the Chevrolet Cruze
How to Remove the Rear Bumper of the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) The main steps today will show you how to remove and replace the rear bumper of the Chevrolet Cruze. First, open the boot and start unscrewing all th…
How to Remove the Starter Motor from the Chevrolet Cruze
How to Remove the Starter Motor from the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this video tutorial, you will learn how to remove and replace the starter motor of the Chevrolet Cruze by following these simple steps. First, ope…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos