Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Car stereo

Removing the car radio from a Chevrolet Cruze with associated parts. Remove the covering plastics to access the car radio. Take off the entire central tunnel cover, remove the trim around the stereo with a plastic lever (where the air vents are located) and detach it from the centre console. Unscrew the securing screws of the radio's control panel. Once the stereo is free from constraints, unscrew the securing screws located on its sides with a screwdriver. Pull out the stereo with your hands and disconnect the cables (power and antenna). Fit the new car radio or have the old one repaired.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the Chevrolet Cruze car radio
How to remove the Chevrolet Cruze car radio
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) If the factory car radio inside your Chevrolet Cruze is broken and you want to replace it with a new one, then all you have to do is read the followi…
How to Replace the Radio Fuse in a Chevrolet Cruze?
How to Replace the Radio Fuse in a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) To replace the radio fuse in a Chevrolet Cruze, disconnect the cover panel of the fuse box located on the dashboard, to the lower left of the steerin…
How to Reset the Radio to Factory Settings on a Chevrolet Cruze
How to Reset the Radio to Factory Settings on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If you're experiencing serious operational issues with the radio in your Chevrolet Cruze, this guide will be useful. With the following manual reset …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos