Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Coolant Reservoir on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely.

Next, unscrew the top cap of the coolant reservoir. Once done, disconnect the relevant hoses by simply pulling them off. At this point, unclip and remove the clip securing the coolant reservoir.

When you have removed the securing clip, you can take the reservoir out of the engine bay of your Chevrolet Cruze, completing the disassembly.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to replace the coolant in the Chevrolet Cruze 1.8
How to replace the coolant in the Chevrolet Cruze 1.8
Chevrolet Cruze (2009-2015 / J300, MK 1) In this guide we will see the instructions that will allow us to replace the coolant of the Chevrolet Cruze 1.8. First, we open the car's engine hood…
How to Replace the Coolant Reservoir of the Chevrolet Cruze
How to Replace the Coolant Reservoir of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today's guide will show you the steps to remove and replace the coolant reservoir of the radiator of the Chevrolet Cruze. First, open the bonnet of y…
How to Replace the Coolant in a Chevrolet Cruze?
How to Replace the Coolant in a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) To replace the coolant in a Chevrolet Cruze, lift the car with a jack to access the underside. Detach the rivets securing the lower engine cover and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos