Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in the Chevrolet Cruze 1.8

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Antifreeze coolant

In this guide we will see the instructions that will allow us to replace the coolant of the Chevrolet Cruze 1.8. First, we open the car's engine hood and start draining the coolant, removing the vent cap or disconnecting the hose; once the purge is complete, we reconnect as shown in the video. At this point, we unscrew the cap of the coolant reservoir, topping up with the appropriate fluid, filling the reservoir up to the maximum level mark.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant Reservoir of the Chevrolet Cruze
How to Replace the Coolant Reservoir of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Today's guide will show you the steps to remove and replace the coolant reservoir of the radiator of the Chevrolet Cruze. First, open the bonnet of y…
Where is the Coolant Temperature Sensor Located in the Chevrolet Cruze?
Where is the Coolant Temperature Sensor Located in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video, you can see where the coolant temperature sensor is located in the Chevrolet Cruze, useful if you need to replace it due to a fault. A…
How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos