Do it yourself
| ||||
|
Chevrolet Cruze - Video tutorial
Model: Chevrolet Cruze
J300, MK 1
- Years 2009-2015 In this video, we can see where the coolant temperature sensor is located in the Chevrolet Cruze, which is useful in case we need to replace it due to a malfunction. As shown, the sensor in question is positioned at about halfway up the left side of the engine, right behind the thermostat. Before being able to replace it, it will be necessary to wait for the engine to completely cool down, and then drain all the coolant in the system. To remove the sensor, simply disconnect the power connector and release the metal clip.
Posted on 14 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |