Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant in a Chevrolet Cruze?

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Antifreeze coolant

To replace the coolant in a Chevrolet Cruze, lift the car with a jack to access the underside. Detach the rivets securing the lower engine cover and remove it. Once removed, open the coolant drain plug and collect the old fluid in a container. After it has fully drained, close the drain plug and open the bonnet: just below the windscreen, you will find the cap for topping up. Pour the new coolant into this cap.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) In this guide we will see the instructions that will allow us to replace the coolant of the Chevrolet Cruze 1.8. First, we open the car's engine hood…
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
Chevrolet Cruze (2009-2015 / MK 1, J300) In this short guide, we will see the instructions that will allow us to top up the AdBlue liquid of the Chevrolet Cruze. First, we open the rear hatc…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos