Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir of the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Today's guide will show you the steps to remove and replace the coolant reservoir of the radiator of the Chevrolet Cruze. First, open the bonnet of your car and start unscrewing the fastening screws found on the sides of the reservoir; then disconnect the two hoses attached to it, loosening the metal clip with pliers, as shown in the video.

At this point, let any fluid drain from the pipe, then install the new antifreeze reservoir; top up with new fluid until you reach the maximum mark!


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to replace the coolant in the Chevrolet Cruze 1.8
How to replace the coolant in the Chevrolet Cruze 1.8
Chevrolet Cruze (2009-2015 / J300, MK 1) In this guide we will see the instructions that will allow us to replace the coolant of the Chevrolet Cruze 1.8. First, we open the car's engine hood…
How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…
Replacing the Radiator in a Chevrolet Cruze
Replacing the Radiator in a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) This guide outlines the steps to remove and replace the cooling radiator in a Chevrolet Cruze. First, open the bonnet of your car and begin removing …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos