Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator in a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Radiator

See other generations:
Video tutorial

This guide outlines the steps to remove and replace the cooling radiator in a Chevrolet Cruze. First, open the bonnet of your car and begin removing the front bumper by unscrewing all the fastening screws located at the top and on both sides of the wheel arches.

Next, unscrew the screws of the cooling fan and then those of the radiator, disconnecting the coolant hose and allowing it to drain into a container for about ten minutes, as shown in the video. At this point, remove and replace the radiator with the new one, following the video tutorial to the end!


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Removing the Radiator from a Chevrolet Cruze
Removing the Radiator from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this video, learn how to replace the radiator on a Chevrolet Cruze. First, open the bonnet: remove the lower wing by unscrewing the screws; then o…
Replacing the Heater Radiator on a Chevrolet Cruze
Replacing the Heater Radiator on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In today's video, we will see the main instructions for removing and replacing the heater radiator in the cabin of a second-generation Chevrolet Cruz…
Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Let's look at replacing the radiator temperature sensor on a Chevrolet Cruze. Lift the front engine bonnet; to remove the temperature valve, you need…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos