Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Bumper of Your Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
This video is currently unavailable

Do you want to replace the front bumper of your Chevrolet Cruze along with the grille? Follow these steps. Lift the bonnet and secure it. Using a battery-powered screwdriver or a screwdriver, remove the securing pins of the grille located in the centre of the bumper.

Once the grille is removed, detach the splash guard pins with a screwdriver and finally remove the rivets located at the bottom perimeter of the bumper. Remove the bumper from the vehicle body by hand.

To proceed with the installation, position the bumper onto the vehicle body and tighten all screws around the splash guard and the perimeter.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight on a Chevrolet Cruze
How to Remove the Front Headlight on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before you start, open the bonnet of your Chevrolet Cruze. Begin by removing the front bumper by unscrewing the fixing screws and clips located aroun…
How to Remove the Front Fog Light from the Chevrolet Cruze
How to Remove the Front Fog Light from the Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) How do you remove the fog light from the Chevrolet Cruze? Follow these steps to remove the fog light and install it back into the front bumper plasti…
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos