Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Headlight

Before you start, open the bonnet of your Chevrolet Cruze. Begin by removing the front bumper by unscrewing the fixing screws and clips located around the entire perimeter of the bumper. Then, unscrew and remove the bolts that secure the front headlight to the car, which you can access after removing the bumper. This will free the front headlight. At this point, extract the front headlight from its housing, disconnect the electrical connector, and you will have completed the removal.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of the Chevrolet Cruze?
How to Remove the Front Headlamp of the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) To remove the front headlamp of the Chevrolet Cruze, you need to loosen all the fixing screws that secure the bumper: open the bonnet and unscrew the…
How to Replace the Front Headlight Bulb in a Chevrolet Cruze
How to Replace the Front Headlight Bulb in a Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) Today's guide will show you how to remove and replace the front headlight bulb in a Chevrolet Cruze. First, open the bonnet and start by removing the…
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos