Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight

See other generations:
Video tutorial

To remove the front headlamp of the Chevrolet Cruze, you need to loosen all the fixing screws that secure the bumper: open the bonnet and unscrew the screws and remove the rivets located at the front of the engine bay. Then, loosen the screws at the bottom of the bumper and inside the wheel arch, so the bumper can be completely removed.

After removal, you can now loosen all the fixing screws of the headlamp, allowing the connector at the back to be disconnected and the headlamp to be replaced.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight on a Chevrolet Cruze
How to Remove the Front Headlight on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before you start, open the bonnet of your Chevrolet Cruze. Begin by removing the front bumper by unscrewing the fixing screws and clips located aroun…
How to Replace the Headlight Bulb on a Chevrolet Cruze
How to Replace the Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The first thing to do when the front headlight stops working is to try replacing the bulb. To replace the headlight bulb on the Chevrolet Cruze, open…
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos