Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Fog Light from the Chevrolet Cruze

Model: Chevrolet Cruze - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fog lights

See other generations:
Video tutorial

How do you remove the fog light from the Chevrolet Cruze? Follow these steps to remove the fog light and install it back into the front bumper plastics. Use a suitable screwdriver to remove the securing screws located under the engine cover: remove the entire cover panel.

Extract the fog light from the car's bumper once unlocked (disconnect the power cable). Install the new fog light with the new bulb (same size and voltage).

Fit the fog light back into the bumper with the securing screws. Reattach the cover panel under the front bumper.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulbs on the Chevrolet Cruze?
How to Replace the Fog Light Bulbs on the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) To replace the fog light bulbs on the Chevrolet Cruze, remove all the rivets located at the top of the front bumper. These, along with some screws, m…
How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…
How to Replace the Front Bulb on a Chevrolet Cruze
How to Replace the Front Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before you start, open the bonnet of your Chevrolet Cruze. This will give you access to the rear side of the blown bulb. Begin by rotating the bulb c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos