Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on the Chevrolet Cruze?

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Fog lights

To replace the fog light bulbs on the Chevrolet Cruze, remove all the rivets located at the top of the front bumper. These, along with some screws, must also be removed from the bottom of the bumper. This will allow access to the back of the grille, where the fog light bulb is located: once removed, you can insert the new fog light bulb into its housing, connecting it to the connector. Finally, reassemble all previously removed parts.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Chevrolet Cruze
Replacement of the front headlight bulb of the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) These short and simple instructions will show us how to disassemble and replace the headlight bulb of the Chevrolet Cruze. First, we open the car's h…
Replacing Interior Light Bulbs on Chevrolet Cruze
Replacing Interior Light Bulbs on Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Replacing the front interior light on a Chevrolet Cruze is a quick and straightforward task. Remove the large plastic cover that also serves as a fra…
How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos