Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Interior Light Bulbs on Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Interior dome light bulb

See other generations:
Video tutorial

Replacing the front interior light on a Chevrolet Cruze is a quick and straightforward task. Remove the large plastic cover that also serves as a frame for the interior light by pulling it from the back as shown in the video.

At this point, you will have enough space beside the light to remove it; however, assist yourself by inserting a small flat-head screwdriver or a plastic wedge into the gap between the light and the buttons. Pull out the small bulbs simply by tugging on them, and of course, replace them.

Proceed in reverse order until fully reassembled.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to Replace the Interior Dome Light Bulbs on Chevrolet Cruze
How to Replace the Interior Dome Light Bulbs on Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) In this video, we will see instructions for removing and replacing the interior dome light bulbs on a first-generation Chevrolet Cruze by following t…
How to Remove the Rear Stop Light on Cruze
How to Remove the Rear Stop Light on Cruze
Chevrolet Cruze (2000-2010 / ) Remove the light on the Chevrolet Cruze to replace it or change blown bulbs? Here’s how to disassemble it. Open the boot lid, then remove the plastic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos