Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Heater Radiator on a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Heater core

In today's video, we will see the main instructions for removing and replacing the heater radiator in the cabin of a second-generation Chevrolet Cruze. First, remove the plastic panel near the pedals and disconnect the heat exchanger pipes by prying them off; let all the fluid inside drain out as shown in the video. At this point, unscrew the fixing screws of the upper plastic shield to remove the light switch controls (disconnecting the electrical connector); also remove the plastics from the centre tunnel, and we will proceed with the removal and replacement of the heater radiator!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radiator from a Chevrolet Cruze
Removing the Radiator from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video, learn how to replace the radiator on a Chevrolet Cruze. First, open the bonnet: remove the lower wing by unscrewing the screws; then o…
Replacing the Radiator in a Chevrolet Cruze
Replacing the Radiator in a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) This guide outlines the steps to remove and replace the cooling radiator in a Chevrolet Cruze. First, open the bonnet of your car and begin removing …
Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Let's look at replacing the radiator temperature sensor on a Chevrolet Cruze. Lift the front engine bonnet; to remove the temperature valve, you need…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos