Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the radiator fan and how to replace the thermostat in a 2012 Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Radiator

Don't worry too much if the radiator fan in your car is not working; first check the fuses and relays, then verify the electrical connections. If the fan motor is burnt out, you need to replace it by unscrewing the supports and disconnecting the cables. For the thermostat, let the engine cool down, drain the coolant and remove the radiator hose. Remove the thermostat housing, replace it with a new one, and reassemble everything. Fill the radiator, bleed the air, and check for leaks. Start the engine and make sure the temperature remains stable. If you don't feel comfortable doing it yourself, contact a specialized workshop immediately.

Posted on 28 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the radiator fan from a Chevrolet Cruze
How to remove the radiator fan from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Before you can begin, open the bonnet of your Chevrolet Cruze and disconnect the positive terminal of the battery to work safely. Start by unclipping…
Removing the Radiator from a Chevrolet Cruze
Removing the Radiator from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video, learn how to replace the radiator on a Chevrolet Cruze. First, open the bonnet: remove the lower wing by unscrewing the screws; then o…
Replacing the Radiator in a Chevrolet Cruze
Replacing the Radiator in a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) This guide outlines the steps to remove and replace the cooling radiator in a Chevrolet Cruze. First, open the bonnet of your car and begin removing …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos