Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radiator fan from a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Blower motor

Before you can begin, open the bonnet of your Chevrolet Cruze and disconnect the positive terminal of the battery to work safely. Start by unclipping and moving the cable connected to the radiator fan. Next, disconnect the cable that powers the fan. At this point, disconnect the various pipes and hoses by simply unscrewing the respective fixing nuts, then unscrew and remove the bolts that secure the fan. Once you have completed this step, you can extract and remove the radiator fan, successfully completing the disassembly.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radiator from a Chevrolet Cruze
Removing the Radiator from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video, learn how to replace the radiator on a Chevrolet Cruze. First, open the bonnet: remove the lower wing by unscrewing the screws; then o…
Replacing the Radiator in a Chevrolet Cruze
Replacing the Radiator in a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) This guide outlines the steps to remove and replace the cooling radiator in a Chevrolet Cruze. First, open the bonnet of your car and begin removing …
How to repair the radiator fan and how to replace the thermostat in a 2012 Chevrolet Cruze
How to repair the radiator fan and how to replace the thermostat in a 2012 Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Don't worry too much if the radiator fan in your car is not working; first check the fuses and relays, then verify the electrical connections. If the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos