Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cooling Fan on the Chevrolet Cruze?

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Checks and maintenance

To replace the cooling fan on the Chevrolet Cruze, you need to loosen the screws located inside the wheel arches of the front wheels: once these are removed, you can loosen the screws securing the fan from underneath. Next, open the bonnet and loosen the screws securing the cabin fan from above; once these are loosened, disconnect all connectors attached to the fan, and it can now be removed from its housing.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) In this guide we will see the instructions that will allow us to replace the coolant of the Chevrolet Cruze 1.8. First, we open the car's engine hood…
Chevrolet Cruze (2009-2015 / MK 1, J300) This guide outlines the steps to remove and replace the cooling radiator in a Chevrolet Cruze. First, open the bonnet of your car and begin removing …
Chevrolet Cruze (2009-2015 / MK 1, J300) Before you can begin, open the bonnet of your Chevrolet Cruze and disconnect the positive terminal of the battery to work safely. Start by unclipping…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos