Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Starter Motor from the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Starter motor

In this video tutorial, you will learn how to remove and replace the starter motor of the Chevrolet Cruze by following these simple steps. First, open the bonnet of your car and locate the starter motor, situated at the rear of the engine block; you can access it from underneath by unscrewing the securing nuts and the electrical connector of the coil, as shown in the video. At this point, remove and replace the starter motor with the new one, as well as with the original; apply the reverse procedure for reassembly!

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) Is the starter motor on your Chevrolet Cruze not working anymore? Let's look at how to remove the starter motor on a Cruze. Open and lift the front b…
Chevrolet Cruze (2009-2015 / MK 1, J300) Before you start, open the bonnet of your Chevrolet Cruze. Begin by removing the front bumper by unscrewing the fixing screws and clips located aroun…
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) If the factory car radio inside your Chevrolet Cruze is broken and you want to replace it with a new one, then all you have to do is read the followi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos