Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Cruze
    4. : Brake pads

Chevrolet Cruze - Brake pads

Chevrolet Cruze (2009-2015 / J300, MK 1)
How to replace the rear brake pads on a Chevrolet Cruze
Before we begin, we will need to lift the rear side of our Chevrolet Cruze. So let's start by unscrewing and removing the rear wheel fixing bolts, and then …read all…
Posted on 27 January 2024 by ScegliAuto
Chevrolet Cruze (2009-2015 / J300, MK 1)
Replacement brake pads on Chevrolet Cruze
Loosen the bolts of the affected wheel, jack up the car and unscrew them completely. After removing the wheel, you can locate the 18mm bolts holding the …read all…
Posted on 20 January 2024 by ScegliAuto
Airbags (1) Alternator (2) Air conditioning (1) Car stereo (3) Battery (4) Air Vents (1) Gearbox (1) Glove box (1) Control unit (1) Key (8) Timing belt (2) -board computer (3) Checks and maintenance (26) Dashboard (1) Headlight (2) Tail light (2) Fog lights (2) Particulate filter (1) Air filter (1) Cabin air filter (4) Oil filter (1) Hand brake (2) Injectors (1) Side turn signal light bulb (1) Headlight bulb (8) Rear light bulb (3) Interior lights ceiling light bulb (2) Antifreeze liquid (1) License plate light (1) Third brake light (1) Handle (1) Engine (1) Starter motor (2) Engine oil (3) Door panel (5) Front bumper (2) Rear bumper (3) Brake pads (2) Tires (4) Gear Shift Knob (5) Pump (1) Fuel pump (3) Door (3) Push button (1) Instrument cluster (8) Radiator (4) Passenger compartment heating radiator (1) Fuse box (10) Seat (5) Coolant temperature sensor (1) Lock (2) Outside rearview mirror (5) Manufacturer's coat of arms (1) Windscreen wipers (3) EGR valve (2) Interior blower (1) Side window (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos